Gx460 TCS Light After Lift? ( 5 Best Ways To Fix)

If you have a TCS (traction control system) light that comes on after you’ve installed a lift, it means that the TCS is no longer functioning properly. The TCS is designed to keep your vehicle from slipping and sliding on slippery or uneven surfaces.

When it’s not working properly, it can cause your vehicle to slip and slide, which can be extremely dangerous. If you see this light, you should take your vehicle to a mechanic to have it checked out as soon as possible.

Know More: Ls Oil Cooler Line Size

5 Ways to fix Gx460 Tcs Light After Lift issue

If you have a Lexus GX460 with the TCS (traction control system) light on after you’ve done a suspension lift.

Here are 5 ways to fix it:

1. Check your suspension

The first thing you should do is check your suspension. If your suspension is not level, it can cause the TCS light to come on. To check your suspension, put your GX460 on a level surface and measure the distance from the ground to the bottom of the doors. The doors should be the same height. If they’re not, you’ll need to adjust your suspension.

2. Check your tires

If your tires are not the same size or type, it can also cause the TCS light to come on. To check your tires, look at the sidewall of each tire. The size and type of tire should be the same. If they’re not, you’ll need to get new tires.

3. Check your wheels

If your wheels are not the same size or type, it can also cause the TCS light to come on. To check your wheels, look at the sidewall of each tire. The size and type of wheel should be the same. If they’re not, you’ll need to get new wheels.

4. Check your brake pads

If your brake pads are not the same size or type, it can also cause the TCS light to come on. To check your brake pads, look at the front and rear brakes. The pads should be the same size and type. If they’re not, you’ll need to get new pads.

5. Check your fuses

If your fuses are not the same size or type, it can also cause the TCS light to come on. To check your fuses, look at the front and rear fuse boxes. The fuses should be the same size and type. If they’re not, you’ll need to get new fuses.

What Do You Need to Do After Lifting Your GX460?

After you’ve lifted your GX460, there are a few things you should do to make sure everything is in good working order.

Here’s a list of things to check:

  1. Check your suspension: Make sure all the bolts are tight and that there is no play in the suspension components.
  2. Check your steering: Again, make sure all the bolts are tight and that there is no play in the steering components.
  3. Check your drivetrain: Check all the bolts on the differential, drive shafts, and axles. Make sure there is no play in any of the joints.
  4. Check your brakes: Make sure the brake pads are in good condition and that there is no play in the brake calipers or brake discs.
  5. Check your tires: Make sure the tires are properly inflated and that there is no excessive wear.
  6. Check your lights: Make sure all the lights are working properly.
  7. Check your engine. Make sure there are no leaks and that all the fluids are at the correct level.
  8. Check your battery: Make sure the battery is properly secured and that the cables are in good condition.
  9. Check your interior: Make sure all the interior components are securely fastened and that there are no loose objects that could become a hazard while driving.
  10. Check your exterior: Make sure all the exterior components are securely fastened and that there are no loose objects that could become a hazard while driving.

Read More: Fix Beeping Sound When Ignition Turned Off issue

how to reset traction control light?

There are a few things you can do to reset the light and get your system up and running again.

First, check your owner’s manual to see if there is a specific procedure for resetting the traction control light on your vehicle. If there is, follow those instructions.

If there is no specific procedure, you can try the following:

  1. Turn off your vehicle’s engine and restart it. This will sometimes reset the light.
  2. Disconnect your vehicle’s battery for a few minutes, then reconnect it. This will also sometimes reset the light.
  3. Take your vehicle to a qualified mechanic or dealership and have them check the traction control system. They may be able to reset the light for you.

If none of these methods work, there may be a more serious issue with your traction control system and you should have it checked by a professional as soon as possible.

Learn More: How To Unstick Oil Pressure Relief Valve?

Fix Traction Control Light Won’t Go Off Issue

If your traction control light won’t go off, there are a few things you can do to try to fix the problem. First, check the owner’s manual to see if there is a specific procedure for resetting the light. If not, try the following:

  1. Turn the ignition key to the “On” position, but do not start the engine.
  2. Press and release the accelerator pedal three times.
  3. Start the engine and drive at a moderate speed for about a mile.
  4. Turn the engine off and restart it. This should reset the traction control system and the light should go off.

If the light does not go off after following these steps, there may be a problem with the traction control system. It is best to take the car to a mechanic to have it checked out.

Conclusion

So, if your TCS light is on after you’ve installed a lift, it’s most likely due to one of two things. Either the lift is too high and the TCS sensors are no longer able to properly detect the ground, or there is something blocking the sensors. In either case, the solution is to lower the lift or remove the obstruction.

frequently asked questions (FAQs)

What causes TCS light to stay on?

The TCS light is typically caused by a problem with the traction control system. This can be caused by a variety of things, such as a faulty sensor, a problem with the traction control system itself, or a problem with the vehicle’s brakes.

Why is the traction control light on my Lexus?

There are a few reasons why the traction control light may be on in a Lexus. One reason may be that the car needs new tires. Another reason may be that the car is low on brake fluid.

Why is both my traction control light on and my traction control off light on?

One possibility is that the traction control system is malfunctioning and needs to be serviced. Another possibility is that the traction control system has been turned off manually, but the light is still on to indicate that it is off. Lastly, it is possible that there is a problem with the vehicle’s traction control sensors.

Can a bad alternator cause the traction control light to come on?

It’s possible. The alternator provides power to the electrical system, and if it’s not working properly the system can’t function correctly. This can cause the traction control light to come on.

More Car Tips

Leave a Comment