Car Won’t Start After Transmission Swap? (Fix Now)

A car transmission swap is when you replace the transmission in your car with a new or different one. This can be done for a number of reasons, such as wanting a different type of transmission, needing a replacement because the old one is damaged, or wanting to improve your car’s performance.

However, sometimes car won’t start after transmission swap. How to face this situation? In this article, we will a complete solution to it. Let’s started.

Car Won’t Start After Transmission Swap: How to Fix?

A car that won’t start after a transmission swap can be a real pain. There are a few things that could be causing the problem, but fortunately, there are also a few things you can do to try to fix it.

The first thing you should check is the transmission fluid level. If the fluid is low, it could be causing the problem. Make sure to check the fluid level with the engine off and the transmission in neutral. If the fluid is low, add more until it reaches the proper level.

If the fluid level is fine, the next thing to check is the transmission filter. A clogged filter can cause all sorts of problems, including preventing the car from starting. If the filter looks dirty, replace it with a new one.

If the transmission filter is clean and the fluid level is correct, the next thing to check is the transmission itself. It’s possible that something inside the transmission is preventing it from shifting into gear.

This is a job for a mechanic, but you can try checking the transmission fluid for debris or metal shavings. If you see anything, have the transmission checked by a professional.

The last thing to check is the engine. If the transmission is shifted into gear but the engine won’t start, the problem is most likely with the engine, not the transmission.

This could be caused by a number of things, including a bad starter, a dead battery, or a problem with the ignition system. Again, this is a job for a mechanic.

If you’ve checked all of these things and the car still won’t start, it’s time to call a tow truck. There’s likely a bigger problem that needs to be addressed by a professional.

Read More: How To Rev Car From Engine Bay?

How do transmission swaps work?

How do transmission swaps work

A transmission swap is the process of removing a transmission from one vehicle and installing it in another vehicle. The most common reason for doing this is that the original transmission is no longer working and needs to be replaced.

There are a few things that need to be considered before doing a transmission swap. The first is compatibility. The transmission from the donor vehicle must be compatible with the engine in the vehicle it is being installed into. This means that the two transmissions must have the same number of gears and be the same size.

The next thing to consider is the transmission mount. The transmission mount is what attaches the transmission to the engine. The mount will need to be compatible with both the engine and the transmission.

The last thing to consider is the driveshaft. The driveshaft connects the transmission to the wheels. The driveshaft will need to be the correct length and have the correct splines for the transmission.

Once all of these things have been considered, the actual transmission swap can be done. The first step is to remove the old transmission. This is done by disconnecting all of the electrical connections and then unbolting the transmission from the engine.

The next step is to install the new transmission. This is done by bolting the transmission to the engine and then reconnecting all of the electrical connections.

The last step is to install the driveshaft. The driveshaft is slid into place and then bolted to the transmission.

Once the transmission is installed, the vehicle can be test driven to make sure that everything is working correctly.

Also Read: 14 Bolt Sf 8 Lug To 6 Lug Conversion

Does transmission matter when the engine swaps?

Transmission choice is a big deal when engine swapping. The options are numerous and the decision can be tough. There are a few key things to consider that will help make the decision a bit easier.

What is the power output of the new engine? This is important because it will help determine what size transmission is needed. A big power increase will require a bigger, stronger transmission.

What is the final drive ratio of the new engine/transmission combo? This is the ratio of the engine’s revolutions per minute (RPM) to the wheel speed. A higher ratio means the engine will spin faster for a given wheel speed.

This is important for two reasons. First, it can help prevent the engine from overrevving and damaging itself. Second, it affects the vehicle’s acceleration. A higher ratio means the vehicle will accelerate faster.

What kind of driving will be done with the new engine/transmission combo? If the vehicle will see a lot of high-speed highway driving, then a tall final drive ratio is desired. This will help the engine stay in its powerband and make the most power.

If the vehicle will be used for drag racing, then a shorter final drive ratio is desired. This will put the engine closer to its redline and make the most power.

What kind of transmission is available for the new engine? This is important because not all engines will bolt up to all transmissions. Make sure to do your research and find a transmission that will work with the new engine.

After considering all of these factors, the decision on which transmission to use when engine swapping can be made. There is no right or wrong answer. It all depends on the application and the budget. Do your research and make the best decision for your project.

Learn More: 00287 ABS Wheel Speed Sensor Rear Right G44 Mechanical Malfunction


If your car won’t start after you’ve swapped the transmission, there are a few things you can check yourself. First, check the fluid level and make sure it’s full. Next, check the transmission filter to see if it’s clogged.

If it is, replace it. If neither of those fixes the problem, the next step is to check the transmission itself. If you see debris or metal shavings in the fluid, it’s time to call a tow truck.

Frequently Asked Questions (FAQs)

Will a transmission make your car not start?

The transmission will not make your car not start. The most likely scenario is that your car won’t start because the starter is bad, the battery is dead, or there is some other issue with the electrical system.

Why is my car not starting but the battery isn’t dead?

If your car isn’t starting but the battery isn’t dead, there are a few things that could be going on. The most common issue is that the starter is either damaged or dirty and needs to be replaced or cleaned.

Another possibility is that the battery terminals are corroded and need to be cleaned. If neither of those is the issue, it’s possible that the fuel system is clogged or the engine is seized. Whatever the issue is, it’s important to get it diagnosed and fixed as soon as possible so you can get back on the road.

More Tips

Leave a Comment